Technical Data Spray Liner Coating
 

The liner material comprises of a plural component, polyurethane / polyurea blended base component with low viscosity, non-temperature sensitive isocyante catalyst formulation.

The liner material meets the guidelines and is approved for FDA / USDA applications for incidental food contact which is certified by the manufacturer.

This unique exclusive cross linking blend of materials results in an incredibly durable surface coating of extremely high impact resistance and durability normally found in very expensive polyurea normally 4 to 8 times the coat. High chemical resistance, abrasion resistance and wear ability lend to a long lasting, industrial coating.

Technical Data:

Hardness of liner material: Shore D hardness of 55+ (ASTM-D2240)

Tensile Strength: 3,025+ PSI (ASTM D638-94b)

Elongation: 275%+ (ASTM D-412)

Tear Resistance Factor: 475 PLI (tear) (ASTM D624)

Flexural Modulus (compaction / impact factor) 52,000+ PSI (ASTM D790)

Abrasion Resistance (Taber test / Grams removed) (FIA no 2, 302 and 800)
> 0.075 - 250 cycles
> 0.075 - 500 cycles
> 0.140 - 1,000 cycles
 

Impact Resistance / FT-lbs: 4.5 (ASTM D256)

Impact Resistance / FT-lbs @ -40F: 0.4 (ASTM D256)

Viscosity Average in Centipoises Scale: 371 (cps)

Setup time from spray gun: approximately 4 seconds

VOC amount (Volatile Organic Compounds): 0 (zero)

Percent Solids: 100%

Flammability (DOT Shipping regulations): non-flammable

Chlorofluorocarbon (CFC Release): none

ISO Release from product: < 1/100th of 1% by volume

USDA / FDA Incidental Food Contact: meets standard

Fire Rating (Flash Point) on wet, non-catalyzed material:
                                            Resin -342F (172C)
                                            Activator = greater than .230F (110C)

Chemical Resistance Factor:

Acetone: C
Dim ethyl Form amide: NR
Gasoline: A
Brake Fluid: C
Methanol: A
Hexane: A
Hydraulic Oil: A
Motor Oil:
Propylene Carbonate: C
Sulfuric Acid: NR
Water: A

A = no damage / B = little damage, discoloration / C = some effect, swelling, discoloration / NR = not recommended

Serving Broward & Palm Beach Counties.

4613 N. University Drive Suite # 182
Fort Lauderdale (Coral Springs), Florida 33067

Call us today @ 1-888-977-7296 (available 7 days a week)
Sales@IndustrialSprayLiners.com